Analyze The Causes Of Burrs In PET Strapping

　　During the use of straps factory products, the appearance of burrs will affect its packaging effect. We need to understand the reasons for the appearance of burrs, find corresponding solutions in time, and avoid the application of PET strapping.

　　There are two reasons for burrs in PET strapping: the quality of PET strapping itself and the improper use of strapping. Each PET strapping manufacturer must have different production technology, and many reasons affect the quality of PET strapping. Therefore, in the production process, it is normal for the packing tape to have burrs. Therefore, when we choose the packing tape, we must first observe the appearance and eliminate the burr phenomenon. Using PET strapping with many burrs will affect our work efficiency.

　　The reason for the burr in PET strapping is that if the burr occurs due to the high oven temperature, the oven temperature should be adjusted appropriately. During the processing, if the stretching temperature is too low, and temperature is too low, burrs are prone to occur, which makes the surface not smooth, so the temperature of PET strapping should be adjusted.

　　It is also possible that during the stretching process, the stretching is resisted due to other factors, resulting in burrs. At this time, we need to adjust the stretching degree.

　　The above is the analysis of the burr phenomenon caused by various reasons and the introduction of solutions. I hope everyone can better use PET strapping and achieve better packaging effects through the understanding of the above information.