What Are The Factors That Lead To Packing Belts Corrosion?

　　Packing belts are usually used on packaging. We will check them in advance before using them. There are many kinds of materials. We just need to choose according to the actual situation. Then, what are the factors that cause its corrosion?

　　1. Packing belts will corrode in this environment, which will affect their use. In addition, the finished product is put into the warehouse without drying. If the product is not dry, the moisture will evaporate from the inside after being put into the warehouse. Not only the product itself will be damaged, but the surrounding parts may also be corroded. There is a layer of water film condensed on the surface of the zinc layer. When the moisture content in the air reaches 60% or in the range of 85-95%, and the pH value is less than 6, the corrosion reaction will be more severe, which will affect its use effect.

　　2. It may be caused by high air humidity. If it is placed in a dark and humid place, it will be easily corroded by moisture.

　　3. Another reason is that the finished product is put into the warehouse without drying. If the finished product of the packing belts is not dry, the moisture will evaporate outside after being put into the warehouse. Not only the product itself will be damaged, but the products nearby may be very likely. will also be corroded.

　　4. There is a layer of water film condensed on the surface. When the moisture content in the air reaches 60 or within the range of 85 or so, and the pH value is less than 6, the corrosion reaction will be more severe. When the water temperature is as high as about 70°C, the corrosion rate is also faster.

　　To sum up, the above is the introduction of the factors related to the corrosion of packing belts, so to avoid corrosion, we need to use straps in a good environment and choose suitable materials for production to avoid corrosion.