The breakage of straps will greatly affect the packaging stability. This is mostly due to excessive use, improper heating, or quality problems. In many cases, it is necessary to solve the problem of incomplete fusion. Usually, press the check valve to release the tension of the straps, then grasp the tensioner for operation, connect the tensioner with the exhaust valve, open the cut-off valve to ensure the packing quality of the straps, and keep it still for 3 seconds during fusion.
Its toughness is not only related to the material itself but also related to the filler in production. Generally, calcium carbonate can be used as a weapon filler, thereby reducing production costs. The price of calcium carbonate is much lower than that of PET raw materials, the more you put, the lower the production cost. But it can't be added indefinitely, adding too much will reduce the toughness of plastic steel straps, and it can't even meet our standard use.
This is why different PET plastic strapping have different toughness. We must check its quality when we buy it. Of course, many other additives are added in the process of production and processing, but it should be appropriate. Otherwise, it will affect the performance and quality of the product, so the quality should also be checked when using it.
Of course, many other additives and auxiliary materials need to be added in the production and processing process, but they should be appropriate, otherwise, it will affect the performance and quality of the product, so we should also pay attention to check the quality when using it. When we use it, we should also pay attention to the correct operation, only the correct operation can guarantee its effectiveness.